Topect Test Chambers Ovens in Indonesia
Topect offers a full range of environmental test chambers/ovens to simulate temperature, humidity, and rapid thermal changes. In Indonesia, Haliatech helps you select the right model, handle installation C commissioning, and deliver automation/data logging integration so your tests are safer, repeatable, and audit-friendly.
Why Use an Environmental Test Chamber?
Before release, R&D and QA teams must validate the reliability of materials, electronic modules, and mechanical assemblies against environmental variation. With a test chamber, you can:
- Run controlled temperature/humidity profiles (steady-state or cyclic).
- Perform stress screening via fast temperature ramps or thermal shock.
- Test large units consistently (walk-in chambers).
The payoff: faster design decisions, lower field-failure risk, and reduced rework cost.
Topect Chamber Types C When to Use Them
- Temperature C Humidity Test Chamber
For durability tests within defined temperature and RH ranges (life tests, soak, climatic profiles). Great for PCBs, sensors, polymers, and mechanical assemblies.
- Rapid Temperature Change / Thermal Cycling
Emphasizes fast heating/cooling rates to expose early failures in solder joints, connectors, or electronic packages. Ideal when time-to-market is tight.
- Thermal Shock Chamber (2-zone / 3-zone)
Transfers samples between hot and cold zones within seconds to trigger thermo-mechanical stress (micro- cracks, delamination). Common in automotive and avionics validation.
- Walk-in Temperature C Humidity Chamber
For large samples or batch testing. Flexible work-space dimensions, cable port layout, and power terminals for active DUTs.
Case Study: Automotive 180 m³ Vehicle Odor Evaluation Room
Customer: GAC Group (Automotive Research) Solution: Walk-in Test Chamber with 180 m³ capacity (internal dimensions 5 m × 12 m × 3 m), target ≤60% RH, and internal airflow ≤0.5 m/s. The room simulates environmental conditions required for vehicle odor evaluation, including precise control of humidity, airflow speed, and air filtration.
Relevance to the Indonesian market:
- Cabin comfort standards keep rising; odor testing helps control the quality of interior components (foam, adhesives, textiles)
- Stable RH control and airflow are critical for repeatable results.
- A large-capacity walk-in simplifies scenario setup and sample variation without constant relocation.
Haliatech can replicate similar configurations for local OEMs/assemblers, including safety interlocks, DAQ C logging, and test SOPs tailored to QA/RCD requirements
Checklist for Selecting a Topect Test Chamber
- Objectives C standards: climatic testing vs. thermal cycling vs. thermal shock; required temperature/RH parameters; test duration.
- Size C capacity: benchtop, floor-standing, or walk-in; allowances for instrumentation and fixtures.
- Data C automation: remote monitoring, data export (CSV/USB), integration with SCADA/LIMS.
- Uptime C safety: alarms, compressor protection, preventive maintenance C spare strategy.
- Utilities C site: power, exhaust, air- or water-cooled, noise, delivery path and installation access.
- Customization: cable ports, power terminals for active DUTs, viewing windows, internal fixturing.
How Haliatech Helps
• Pre-sales C site survey to determine the most economical model that meets your test specs.
• Integration C commissioning including installation, safety interlocks, DAQ C control, and connectivity to enterprise data systems.
• Training C documentation (operating SOPs, log templates, maintenance guidance).
• After-sales support for troubleshooting, periodic calibration via partners, and module/accessory upgrades.
Quick FAQ
- What’s the difference between a Temperature C Humidity chamber and a Thermal Shock chamber? A Temperature C Humidity chamber maintains controlled temperature and RH (steady/cyclic). A Thermal Shock chamber moves the sample between hot and cold zones very quickly to induce thermal stress.
- Does Topect support customization? Yes. For large-capacity needs, walk-in options and tailored dimensions, ports, and utilities can be configured to fit your site.
- When do I need Rapid Temperature Change? When internal standards require high ramp rates and you want to accelerate durability testing to uncover design weaknesses early.
Let’s Discuss Your Project
Need a demo, consultation, or site survey? The Haliatech team is ready to help from needs assessment to a turnkey testing solution.
